User's Manual

12
12.
Do not pull on the device’s cable. Hold on the plug to take out to open up the cable.
13.
This device can be used according to this manual in relation to the refractive power and
their application.
14.
Always test the state of the device’s external appearance and check whether it is
functioning well before using the device.
15.
Do not block device’s hole for heat radiation.
16.
Turn off the power immediately and take out the plug when there is smoke, spark,
abnormal noise or smell.
17.
IEC standard needs to be satisfied with in order to connect an outside device with
input/output signal or other connector. (IT equipment is IEC 60950, and electric equipment
for medical use is IEC 60601). Moreover, all the systems need to satisfy the safety
requirement, IEC 60601-1 when it comes to the electric system for medical use. Person
who connects outside device with input/output signal or other connector has the obligation
to take responsibility in accordance to the IEC60601-1. Contact local technician or distributor
if you have doubts.
18.
This equipment may cause edge which is hazardous for other devices at the periphery.
Wireless frequency may be generated or used, and energy may be released when the
device is not installed or used according to the guideline. However, there is no guarantee
that edge does not result when carrying out specific installation. If this device leads to
hazardous interception on other device when the equipment is turned on/off, user needs to
solve the interception issue by using one of the following measures.
-
Change direction or relocate the receiver
-
Distance between equipment is increased
-
Connect the equipment with the socket of the circuit connected with other device and
other circuit
-
Ask manufacturing business or field service technician for help
19.
To avoid electrocution, this device must be connected to the supply power along with
protective grounding.
20.
Do not place at a difficult location when separating cable when it comes to the device’s
placement.
21.
When you carry this product, please hold on front and back bottom of the product. If you
want the product to be installed on another place, please call A/S center.