User's Manual

8.13. Network Screen

This screen can connect wifi and set the DHCP/Static mode and can be changed webserver

setting.

You can go into the Network Screen by pressing on the (Network) button in the Setup

Screen.

1. On: Turn on the Wifi. If you have an AP that was already connected, it will automatically connect.

2. OFF: Turn off the Wifi.

3. Scan: Search the surrounding the AP.

4. Verify: Try to connect entered the SSID AP and password AP.

5. TCP/IP: Go to Screen where you can convert to Static or DHCP mode.

6. Web Services: Go to Screen Where you modify Web server setting.

7. IP: Shows the IP of the currently connected AP.