SAX1V1R User Manual Copyright© 2020 by Sercomm Corp. All rights reserved.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Product Spec Product Spec: Wi-Fi: 802.11 a/b/g/n/ac/ax (2.4G & 5GHz) WAN: 2.
Chapter 1: Item in the Box You will see following items when opening the box SAX1V1R 802.
Chapter 2: Prepare to Power On 1. Connect the WAN cable to the RJ45 port (Internet) 2. Connect the LAN cable to the RJ45 port (Ethernet) 3. Tight up the SAX1V1R with wall mount bracket (Option) 4. Connect the power adaptor DC plug with SAX1V1R Power connector, connect the power adaptor to AC Plug Chapter 3: LED Behavior When Boot Up Device LED MUST illuminate in 2 seconds or less when it has started receiving power from mains.
Chapter 4: Install Wall Mount Bracket User has to prepare wall mount kit as below before install wall-mount bracket. Once wall mount kit installed on the wall, user can install the wall mount screw and washer on SAX1V1R.