Manual
www.chasing.com
support@chasing-innovation.com
· This quick start guide is only for the basic operation of CHASING M2.
· This content is subject to change without prior notice, you could have the latest
user manual by the www.chasing.com.
Main Parts
· ROV · Tether & Winder· Remote Controller
Quick Start Guide V1.0
Wi-Fi
Wi-Fi
Gladius_5G_xxxxx
xxxxxxxxxx
CHOOSE A NETWORK...
6:27 89%
Settings
xxxxxxxxxx
xxxxxxxxxx
Chasing_xxxxx
a. On the Phone/Tablet, go to Wi-Fi settings.
b. Wait for 5-10 seconds and the Chasing_xxxx network will appear as an option.
c. Click to connect and enter the Wi-Fi password: 12345678
4 Wi-Fi Connection
Open the APP and enter the camera, you will see the real-time scene transmission.
5 App interface Introduction
a. Grasp the grips on both sides of the ROV with both hands and gently throw the ROV into the water.
b. Unlock the Thruster(motors) to dive.
c. For a better experience, it is recommended to ensure that the water depth exceeds 1 meter.
6
Drop the ROV into Water
* Note:1. As the drone will connect to the 2.4G Wi-Fi by default, you can switch to 5G Wi-Fi to get a better
experience. (Turn on 5Ghz in the Settings-ROV, the drone's Wi-Fi will automatically restart, and
you may need to re-connect to the Gladius Wi-Fi).
2. You could check more guidance videos on the website page https://www.chasing.com/,or you
could contact the global support team with any questions :support@chasing-innovation.com
Installation & Connection
CHASING GO1 App:
Scan the following QR code or visit the IOS APP
Store/Google Play/Chasing website for downloading.
(For IOS 9.0 or later/Android version 4.4 or later)
1 Download CHASING GO1 App
a. Insert one end of the tether connector into the remote controller connector socket.
b. Reserve a suitable length and hang the Buckle on the Buckle Bracket, and make it tension.
c. Insert the other end of the tether connector to the ROV.
d. Securely hand-tighten both connectors.
2 Connect ROV with Remote Controller
a. Turn on the remote controller power button.
b. A few seconds later, the remote controller’s
indicator lights up, 5G or 2.4G light will be always on.
The drone LED lights will flash shortly,
accompanied by two self-tests sounds.
c. Check all the connectors and lights pre-dive, and
unlock the ROV when everything is ready underwater.
3 Start (turn on) the ROV
* Warning: Check whether the O-ring on the tether connector pre-dive. If it is missed or damaged, please
replace it in time.
5
General
Settings
Compass
VR Live Stream
Shrink
Video
Slow
Motion
Return
Side
Menu
Depth
Light
Angle
Unlock/lock ROV Mode
3D
Gesture
Signal Strength
Battery
White
Balance
Lock
Picture
Video
Recording
Camera
Settings
Temperature
Maintenance and Precautions
Navigation Safety
1
Battery Protection
2
Other
1. Do not turn on the LED lights before entering the water to avoid damages.
2. Check if the Thrusters/propellers are getting stuck by seaweed or external matters, rinse the ROV with fresh
water and then dry and put it back in the packing box.
3. Remote control cannot be washed with water, please clean it with towel.
4. The pull ring at the end of the battery can only be used to remove the battery, not to lift the ROV, otherwise
it may damage the ROV.
5. Do not place heavy objects on drone or accessories to avoid possible damage.
6. People under the age of 16 should only use this drone under adult supervision.
7. When not in use, please do not expose the drone and accessories under sunlight. Store it in a cool place or
in a special box.
8. Chloride or other chemicals can erode Chasing M2. Do not use if the pool is under high chlorine level.
Support
1. Any questions about our products please contact by support@chasing-innovation.com or leave a message
on the Chasing Website (https://www.chasing.com) chatting window.
2. You can also join the OFFICAL CHASING OWNERS GROUP on Facebook for latest news, app update and
other shared stories with Chasing Products worldwide.
Open sea
navigation
Relatively clear
water quality, no
dense seaweed
No dense radio
or radar signals
Do not dive
more than
330 ft
330ft
Charging Protection
3
·Only use the Chasing standard adapter.
·Red light means charging.
·Green light means fully charged.
a. Do not touch the propellers of the Thruster
b. Do not unlock the Thruster for more than 30 seconds in the air to avoid overheating
c . After using the ROV in the salt water, please put it in fresh water for about 1 hour and turn it on, let the
drone run for10 minutes to discharge the salt, and try out the water after cleaning with a towel.
Thruster/ Propeller
4
Connector Sockets /Tether Connectors
5
·Check the Connector socket and tether pre-dive, keep dry and clean.
Salt and moisture may cause corrosion of the connector. Be sure to wash the socket with fresh water if
the interface has water stains, and make the connectors dry after cleaning.
O-ring
6
· Check whether the O-ring on the tether connector/Battery socket/SD card socket pre-dive, and make
a replacement when it is missed or damaged.
· It is recommended to grease the o-ring at the interface seal for maintenance each time when the battery
cabin and Micro SD card are removed and installed
Do not run out
of battery power
Charge when
power is less
than 25%
When not in use,
keep battery power
at 50% - 70%
Working
temperature
-10 °C ~ 60 °C
( -18°F-140°F)