Portable Power Station PS151032 User Manual
Disclaimer Before using this product, please read the user manual of this product carefully to ensure correct use after full understanding. Please keep this manual properly after reading it. Incorrect handling of this product may cause serious injury to you or others, or damage to the product and damage to property. Once you use this product, you are deemed to have understood and accepted all the terms and contents of this user manual.
Directory Safety guidelines 01 Parameter specification 02 Getting Started 03 1. Product details 03 2. Display icon descriptions 04 3. Product instructions 05 4. Product charging instructions 07 5.
Safety fingerCite Please follow the following instructions to ensure safe use: 1. Do not put your finger into the bottom of the handle when the handle is pulled up to avoid injury. 2. It is strictly forbidden to keep this product close to heat source, such as fire source or heating furnace. 3. It is strictly forbidden to let this product contact with any liquid. Do not immerse this product in water or wet it. Never use this product in rain or humid environment. 4.
Parameter specification Battery specification Capacity 1036Wh (28.
2. Display icon description 1 2 3 17 4 5 16 6 15 7 14 8 9 10 11 12 13 1. Battery charge indication: When charging, the icon rotates clockwise. 2. Charging status indication: When charging status, the icon is always on. 3. Percentage of battery power: Percentage of current remaining power. 4.
13. DC output: Cigarette lighter port, DC5.5*2. 5 and DC5.5*2. 1 ports have been opened, and wireless charging port is in standby state. 14. Overload alarm: When the output power exceeds 1800W, the icon is always on. 15. Output power: Displays the current discharge power of this product in watts. 16. Input Power: Displays the current charging power of this product in watts. 17. Remaining charge/discharge time: Remaining full time when charging or remaining discharge time when discharging.
3. Product instructions 3.1 Startup, shutdown and LCD lighting Start-up: Press the total power supply for 2 seconds, the LCD screen will be lit, and the total power indicator will always be on. The LCD screen automatically goes out: After 5 minutes without any operation, the X 1500 will go to sleep. The LCD screen is automatically lit: when the product has load change or operation. Start or turn off the LCD screen: Please press the main power button briefly.
3.3 Using USB Output Open and close: After ensuring that the total power supply of this product is turned on, press USB output power button briefly to open or close USB-A and USB-C output ports. Automatic shutdown: If the USB output port of this product has no load for 10 hours continuously, the USB output power button will automatically shut down. When the USB output power is turned on, the main power supply of the product will not automatically turn off.
Noteļ¼ 1. The DC 24V port standard of this product is DC5.5*2. 5 port; The 12V port standard is DC5.5*2. 1 port. Please confirm the product port type before use, or consult the equipment manufacturer for more information. 2. Wireless charging, DC5.5mm port and cigarette lighter port have a total output of 120W, and the port exceeding this power is protected due to overload/short circuit, and the output is closed. 3. Wireless charging supports fast charging of up to 15W.
4. Product charging theoryMing 4.1 AC/Adapter Charging Connect the AC plug of the standard charging adapter to the AC socket, and connect the DC7909 port at the other end to the charging DC port of this product to charge this product. Alternating current socket Note: 1. Please use a special charging adapter to charge this product. If the adapter is damaged, please do not continue to use it and contact the manufacturer. 2.
Note: 1. This product has the function of maximum power point tracking (MPPT), which makes the charging speed faster. 2. Please use the standard solar charging cable of this product. The charging port of this product is DC7.9*0. 9. Using the unofficial standard solar charging cable may damage the product. 3. The charging voltage range of the charging port of this product is 12-32V.
5.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
