Remote Infrastructure Management RIM-600 User Manual

Chapter 1: Installation

Operating Environment

Before you install the RIM-600 Host be sure that your operating environment meets the physical

requirements of the equipment.

Operating Temperature: 32º–122º Fahrenheit (0º –50º C)

Humidity: 5–90 %RH, non-condensing

Power: 90–260VAC 47/63 Hz outlet within 6'

Rack Requirements: Standard 19

" equipment rack with supplied mounting bracket

hardware. Requires 1.0 EIA rack mount space.

Tabletop requirements: Flat area which can support an enclosure 17" wide by 10" deep by 2"

high.

Rack Mount Installation

The RIM-600 Host can be rack mounted using the included rack mount brackets. Follow the steps

below:

1) Attach rack-mount brackets to the sides of the Host unit with a Phillips screwdriver.

2) Attach the unit to the equipment rack using two pan-head screws per side. Tighten the

screws with a Phillips screwdriver.

3) Plug the power cord into a 90-260VAC outlet.

Figure 3: Rack-mounted Host Unit

Wall Mount Installation

The RIM-600 Host can be wall mounted using the optional wall mount brackets. Follow the steps

below:

1) Attach the optional wall mount brackets to the sides of the

RIM-600 using the eight black

#6-32 screws. A Phillips screwdriver will be required. (Order part # 60075-001 Universal

Wall Mount Kit)

2) Attach the unit to the wall using two screws per side. Tighten the screws with a Phillips

screwdriver.

3) Plug the power cord into a 90-260VAC outlet.