Remote Infrastructure Management RIM-600 User Manual

RIM-600 Manual

The “Enable This Profile” option provides a convenient way to temporarily enable or disable a User

Profile. When a Profile is disabled (unchecked), no alarms or reports will be sent to that user, and

the user will not be permitted to log on to the system.

Clicking the Permissions button will bring up the Permission screen.

Permissions

Each user profile has a programmable security level for each device (host/nodes) in the system. To

set the Security Access level click the Permissions button. There are three access levels: Master

System Administrator, Site Administrator, and User. The restrictions for each security level is as

follows …

Master

System Site

Admin Admin User

Add user profiles Yes No No

Disable user profiles Yes No No

Edit unit properties Yes No No

Edit e-mail settings Yes No No

Edit Node properties Yes No No

Update firmware Yes No No

Configure data logger Yes No No

Add/delete classes Yes No No

Add/delete holidays Yes No No

Edit default input templates Yes No No

Delete sensors Yes Yes No

Disable IP alarms Yes Yes No

Reset min/max Yes Yes No

Other programming changes Yes Yes No

Add camera Yes Yes No

Acknowledge alarms Yes Yes Yes

Switch a PowerGate outlet Yes Yes Yes

Online via local PC Yes Yes Yes

Call in via voice Yes Yes Yes

Call in via modem Yes Yes Yes

Visit password protected Web Yes Yes Yes

To configure a profile as a Master Administrator simply check the box at the top of the screen.