ChatterBox 24P, 05-07 5/17/07 8:33 PM Page 24
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 1 INTRODUCTION Thank you for your recent purchase of the ChatterBox GMRS X1 Bluetooth® system.The GMRS X1 Bluetooth® is a 2 channel (38 talk groups) UHF transceiver with up to 5 mile range. Bluetooth® Advanced Audio Distribution Profile (A2DP) technology allows pairing of a Bluetooth® equipped cell phone and a Bluetooth® audio source simultaneously without the use of wires.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 2 CONTENTS Introduction Unpacking and Inspecting Features Initial Set-Up Operation Power On/Off VOX Sensitivity Channel Volume Level Talk Group Beep On/Off Key Lock On/Off Scan Power Save Level Intercom Monitor Audio Input AUX Input Battery Indicator Bluetooth®Features Headset Installation Main Unit Installation VOX Description VOX Adjustment Instructions Trouble Shooting Technical Specification Warranty / FCC License Information Page 2 4 5 6 7 7 7 7 8 8 8 8 8
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 3 UNPACKING AND INSPECTING Check that all contents are in good order. If any parts of the equipment have been damaged in transit or are missing, please contact our customer service department immediately at 888-452-2269 1. Bluetooth® GMRS Transceiver 2. HiFi noise reducing headset/microphone 3. 1 Rechargeable Ni-MH battery 4. AC home charger 5. PTT (Push-to-Talk-Button) 6.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 4 FEATURES 05
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 5 INITIAL SET-UP The rechargeable Ni-MH battery comes initially charged from the factory. We recommend that the battery be pre-conditioned by allowing it to drain completely before applying an additional 14 hr. charge.To reduce the risk of damage to the battery do not use any other charger except the one supplied with the kit. Please note the battery should have a full charge before the unit is stored for a long period of time.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 6 OPERATIONS LCD 1 2 3 4 5 6 7 8 9 Description MODE INTERCOM MODE SCAN MODE VOX BATTERY METER MELODY LOCK TALK GROUP CHANNEL POWER ON/OFF Turn the VOX sensitivity dial clockwise to turn the unit on.The radio will emit a tone to let you know the unit is on. Turn the VOX sensitivity dial counterclockwise to turn the unit off. The radio will emit a tone to let you know the unit is off. VOX SENSITIVITY The VOX dial controls the sensitivity of the microphone.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 7 VOLUME LEVEL Choose the desired volume level with the Up/Down button.Then press the PTT button to enter. TALK GROUP Press the Mode button once, while the number is blinking choose the desired “talk roup” by pressing Up/Down button.Then press the PTT button to enter. BEEP ON/OFF Press the Mode button twice, choose beep On/Off by pressing the Up/Down button.Then press the PTT button to enter.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 8 INTERCOM Press the Intercom button for 3 seconds to switch to intercom mode.You will then hear a chime letting you know that the intercom has been activated. Press the same button again to cancel and start regular transmission. MONITOR Press the Intercom button to listen in on a channel for weak signals. Press it again to cancel. AUDIO INPUT Connect your desired audio source (i.e. Walkman, CD, MP3 player etc.) with our optional audio cord.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 9 BLUETOOTH® FEATURES The GMRS X1 ChatterBox model uses Bluetooth® A2DP Technology. In order to make use of the Bluetooth® capabilities in your unit you must first have one of the following: 1) Cellular phone that is Bluetooth® capable. 2) Bluetooth® audio device or audio source that is attached to an aftermarket Bluetooth® adapter (call for info). 3) GPS Navigation unit that is Bluetooth® capable.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 10 2) Proceed to conduct the Pairing procedure listed above in bold. 3) After the Bluetooth® logo is blinking and you have released the Intercom/monitor button,, proceed to plug the Bluetooth® adapter into your music device while following any type of pairing instructions that came with it. 4) Allow up to 30 seconds for the devices to pair and the music should automatically start playing through the headset.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 11 2) Under the Bluetooth® category of your phone, you should find a feature that allows you to search for Bluetooth® devices. Navigate to this selection but do NOT conduct the search just yet. 3) Proceed to conduct the pairing procedure with the ChatterBox mentioned above in bold. 4) Immediately after conducting the pairing procedure on the ChatterBox, press the button that allows your phone to search for new devices.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 12 and you will hear the phone ring through your headset. When this happens all you need to do is push the MODE button again. *If your phone has a built in Mp3 player you can also use your phone as your music device. When in Bluetooth® mode you can use the ChatterBox volume controls to adjust the volume of your phone call and channel controls for track selection when using the Mp3 player.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 13 D) INSTRUCTIONS FOR PAIRING A GPS NAVIGATION SYSTEM W/BLUETOOTH® FEATURE 1) Follow the instructions for your GPS for pairing with a device.This should include turning the Bluetooth® feature ON and searching for a new device. (When you get to the selection that allows your GPS to search for a new device do NOT search just yet) 2) With the ChatterBox unit in the OFF mode push and hold the Intercom/Monitor button down.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 14 HEADSET INSTALLATION 1. For the open face headset, use the plastic tie clip to secure the windsock. For the full face headset, microphone covers come preinstalled. 2. Helmets without speaker pockets. Attach the foam covers to the speakers respectively (Drawing 1). Attach the hard velcro disk to the back of the speakers (Drawing 2). Attach the soft velcro disks to the helmet liner.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 15 MAIN UNIT INSTALLATION Fasten the mounting bracket snugly to the bottom left side of the helmet with the bolts supplied. Make sure the rubber pad is placed between the outer mounting bracket and the outer shell of the helmet.Then align the mounting bracket with the grooves on the back side of the main unit. Slide down the main unit on to the mounting bracket until it latches firmly into place.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 16 VOX DESCRIPTION The VOX system on your new ChatterBox enables the microphone to be voice activated.This means that when you speak the microphone will automatically transmit your voice. It is best to think of the VOX as the microphone sensitivity setting. Turn the power switch to on. If you turn the VOX sensitivity dial clockwise and speak through the microphone, the VOX operates and automatically transmits.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 17 VOX ADJUSTMENT INSTRUCTIONS It is highly suggested that each new user practice adjusting their radio before riding. It’s simple, quick and effective. A) With the unit off, turn the VOX knob to the “Hi” (high) sensitivity position. B) Place the helmet on your head (with the ChatterBox fully install). C) Speak into the microphone in a normal voice.You should hear your voice in the speakers. Adjust the volume to a comfortable setting.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 18 TROUBLE SHOOTING Problem 1. Cutting out during transmission. Solution 1) Adjust the mic sensitivity to a higher setting (clockwise) or speak louder. Solution 2) Position the microphone directly kissing your lips and speak without pausing.The closer the microphone is to your lips, the clearer you will transmit. Problem 2. Not receiving. Solution 2) Adjust the mic sensitivity to a lower setting (counter clockwise). Problem 3. Short operating range.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 19 TECHNICAL SPECIFICATIONS GENERAL 1) Frequency range 462.550MHz-467.7125MHz 2) Modulation type 16KOF3E (FM) 3) Channel capacity 22 Channels 4) Channel spacing 25KHz 5) Power supply pack DC 4.8V; Ni-Mh rechargeable 6) Current drain transmitter (2W); <1100mA 7) Battery life 8 hours.Talk time; 20 hrs.. stand by time 8) Operating temperature -20C + 60C 9) Dimensions 65(H) x 132 (W) x 39 (D) mm 10) Weight 8 oz.
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 20 CHATTERBOX USA LIMITED WARRANTY ChatterBox USA guarantees that each new ChatterBox will be free from defective materials and workmanship for a period of one (1) year from the date of original purchase.
ChatterBox 24P, 05-07 .
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 22
ChatterBox 24P, 05-07 5/17/07 8:33 PM Page 23 ChatterBox USA 16918 Edwards Road, Cerritos, CA 90703 888.452.2269 www.chatterboxusa.
