User Manual

CORE™ 3x3 User Manual Rev. 2 Page 9 of 24
Mounting
Before mounting the product
, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The CORE™ 3x3 may be mounted in any position
; however, make sure adequate
ventilation is provided around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the Technical Specifications
).
• When mounting the product overhead, always use a safety cable.
Mount the
product securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is
appropriate for
this purpose.
• When power linking multiple products, you must
always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
• The bracket adjustment
knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
• When mounting the product on the floor, make sure that the product and cables are
away from people and vehicles.
Mounting Diagram
Hanging/Mounting
Bracket
Mounting Clamp
Bracket
Adjustment
Knobs
Safety Cable