User Manual

Page 2 of 10
BEFORE YOU BEGIN
Geyser T6 User Manual Rev. 1
Safety Notes
• Not intended for permanent installations.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect this product from the power source before cleaning it or replacing the
fuse.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Do not mount this product on a flammable surface (e.g., wood, linoleum, carton, plastic, or
carpet).
• Make sure there are no flammable materials close to the unit while operating
• Do not touch the output nozzle on this product. It is very hot during operation and it may
remain hot for several hours after turning the unit off.
• Do not drink the fog fluid. If you do, call your local emergency service (911 in the US) for
help.
• Do not add perfume, alcohol, gasoline, or any other flammables to the fog fluid.
• Depending on the amount of fog generated, all fog machines may set off smoke detectors.
• In certain environments, fog fluid-based machines may leave a slippery residue on floors
and surfaces.
• Do not use for space heating purposes.
• Use only CHAUVET® DJ water-based fog fluid.
• Drain the tank before transporting the product.
• Always make sure that the voltage of the outlet to which you are connecting the product is
within the range stated in the decal or rear panel of the product.
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
• Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
• Be sure that no ventilation slots on the unit’s housing are blocked.
• Never connect this product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the handle.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate this product at
higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair this product. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product to someone else, be sure that
they also receive this document.