User Manual

Page 5 of 10
Geyser T6 User Manual Rev. 1
OPERATION
4. OPERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display, and the two
manual control knobs located to the right of the display. Please refer to the Product Overview
to see the
button and knob locations on the control panel.
Menu Map
BUTTON FUNCTION
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
<MANUAL FOG> Triggers fog output
MODE PROGRAMMING LEVELS DESCRIPTION
Manual Button
Color/Program
CoLo
P 0 No color
P 1 Red
P 2 Green
P 3 Blue
P 4 Yellow
P 5 Magenta
P 6 Cyan
P 7 White
P 8 Red strobe
P 9 Green strobe
P 10 Blue strobe
P 11 Yellow strobe
P 12 Magenta strobe
P 13 Cyan strobe
P 14 White strobe
P 15 Auto fade
P 16 Auto snap
FC-W
Color/Program
CH-1 P1 0–16 Selects button 1 color/program, as above
CH-2 P2 0–16 Selects button 2 color/program, as above
CH-3 P3 0–16 Selects button 3 color/program, as above
CH-4 P4 0–16 Selects button 4 color/program, as above
Temperature Ht _ _ _ Displays the current heater temperature