User Manual

Intimidator Scan/Barrel 305 IRC User Manual Rev. 1 Page 10 of 27
Mounting
Before mounting the product, read and follow the safety recommendations in the Safety Notes
section.
Orientation
The Intimidator Scan/Barrel 305 IRC can be mounted in any position, but make sure the
placement allows adequate ventilation for the product, and allows for movement of the yoke
and head in any direction.
Rigging
Be sure to place the product in a location that allows easy access to it for maintenance and
programming, and enough space around the product for ventilation.
Make sure that the structure or surface onto which the product will be mounted can support
the
product’s weight. For more information see the Technical Specifications section.
When mounting the product overhead, always use a safety cable
and make sure the product is
attached securely.
When mounting the product on a truss or pipe, use a mounting clamp with the
appropriate
weight capacity. Chauvet has a full range of mounting clamps.
See
http://www.chauvetlighting.com/cables-clamps-main.html for the complete selection.
The rubber feet serve as floor supports. When placing the product
on the floor, make sure that
the product and cables are away from people and vehicles.
Rigging Diagram
Safety Cable
(such as CH-05 from
Chauvet)
Mounting Clamps
(such as CLP-15 from Chauvet)
Hanging/
Mounting
Bracket
Rubber Feet (x4)
Secure the safety cable
using the pass-
through on
the back of the product