Manualshelf

User Manual

ManualsBrandsChauvet DJ ManualsMobile Heads and ScannersIntimidator Scan 305 IRC
11121314151617181920
Intimidator Scan/Barrel 305 IRC User Manual Rev. 1 Page 20 of 27
Configuration
(Settings)
The Intimidator Scan/Barrel 305 IRC can be customized with settings such as pan direction,
screen orientation, and sound sensitivity. Below are instructions for configuring
all the settings
available.
Pan Reverse
Reversing the pan movement is useful when 2 lights are facing each other and they both need to
turn toward the same direction.
To reverse the pan movement do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Pan Reverse option.
5. Press <ENTER>. The words ON or OFF will show in green.
6. Use <UP> or <DOWN> to switch between ON and OFF.
7. Press
<ENTER>
to select the setting.
Tilt Reverse
Reversing the tilt movement is useful when 2 lights are facing each other and they need to point
towards the same space between them.
To reverse the tilt movement, do the following: Press <MENU> repeatedly until
4 icons show on
the display.
1. Use <UP> or <DOWN> to highlight the Setup icon.
2. Press <ENTER>. The Setup options will show on the display.
3. Use <UP> or <DOWN> to highlight the Tilt Reverse option.
4. Press <ENTER>. The words ON or OFF will show in green.
5. Use <UP> or <DOWN> to switch between ON and OFF.
6. Press
<ENTER>
to select the setting.
Screen Reverse
The display can show the screen in two directions, one for when the fixture is standing and one
for when it is mounted upside-down.
To set the display orientation, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Screen Reverse option.
5. Press <ENTER>. The words ON or OFF will show in green.
6. Use <UP> or <DOWN> to switch between ON (upside-down display) and
OFF (normal display).
7. Press <ENTER> to select the setting.