User Manual

Shocker™ Panel 180 USB User Manual Rev. 1 Page 11 of 19
DMX Personality
and
Starting
Address
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address
that is too high, you could
restrict the access to some of the product’s channels.
The Shocker™ Panel 180 USB uses up to 8 DMX channels in a 8-CH DMX mode
, which
defines the highest configurable address to 505.
If you are not familiar with the DMX protocol
, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 2-CH, 5-CH, or 8-CH shows on the display.
2. Press <ENTER> and d 1–d512 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
DMX Channel Assignments and Values
8-CH
Channel
Function
Value
Percent/Setting
1
Zone 1
000
ó
005
No function
006
ó
249
Strobe rate (slow to fast)
250
ó
255
Continuous on (blinder effect)
2
Zone 2
000
ó
005
No function
006ó249 Strobe rate (slow to fast)
250
ó
255
Continuous on (blinder effect)
3
Zone 3
000
ó
005
No function
006
ó
249
Strobe rate (slow to fast)
250
ó
255
Continuous on (blinder effect)
4
Zone 4
000ó005 No function
006
ó
249
Strobe rate (slow to fast)
250
ó
255
Continuous on (blinder effect)
5
Auto/Sound-Active
Programs
000
ó
020
No function
021
ó
040
Auto program 1
041ó060 Auto program 2
061
ó
080
Auto program 3
081
ó
100
Auto program 4
101
ó
120
Auto program 5
121
ó
140
Auto program 6
141ó160 Auto program 7
161
ó
180
Auto program 8 (Auto programs 1–7)
181
ó
225
Sound-active mode 1
226
ó
255
Sound-active mode 2
6
Auto Speed
(when Channel 5 is set
at 021–180)
000ó255 Auto program speed (slow to fast)
Sound Sensitivity
(when Channel 5 is set
at 181–255)
000
ó
010
No function
011ó255 Sound sensitivity
7
Dimmer
000ó255 0–100%
8
Strobe All Zones
(when Channel 1-4 set
at 006–255)
000ó005 No function
006ó255 Strobe rate (slow to fast)