User Manual

ManualsBrandsCHAUVET DJ ManualsContinuous LightingShocker Panel 180 USB LED Strobe Light

Shocker™ Panel 180 USB User Manual Rev. 1 Page 13 of 19

Configuration

(Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

Connect the product to a suitable power outlet.

Never connect a product that is operating in any standalone mode

to a DMX string

connected to a DMX controller. Product

s in standalone mode may transmit DMX

signals that could interfere with the DMX signals from the controller.

Automatic

Programs

To run the Shocker™ Panel 180 USB in automatic mode, follow the instructions below:

1. Press <MENU> repeatedly until P-- shows on the display.

2. Press <ENTER>.

3. Use <UP> and <DOWN> to select an auto program P 1–P 8.

4. Press

<ENTER>

Sound-Active

Mode

To run the Shocker™ Panel 180 USB in sound-active mode, do the following:

1. Press <MENU> repeatedly until SNd shows on the display.

2. Press <ENTER>.

3. Use <UP> and <DOWN> to select a sound-active program Snd1 or Snd2.

4. Press <ENTER>.

The product will only respond to low frequencies of music (bass and drums).

Custom Mode

To custom mix a static color, follow the instructions below:

1. Press <MENU> repeatedly until U-- shows on the display.

2. Press <ENTER> and dxxx will show on the display:

3. Use <UP> and <DOWN> to increase or decrease the dimmer value.

4. Press <ENTER> and Sxxx will show on the display.

5. Use <UP> and <DOWN> to increase or decrease the strobe speed.

Auto-Program

Speed

To change the auto-program speed on the Shocker™ Panel 180 USB, do the following:

1. Press <MENU> repeatedly until S-- shows on the display.

2. Use <UP> and <DOWN> to increase or decrease the program speed (S 1–S100).

3. Press <ENTER>. The product will return to the last selected mode.

Sound Sensitivity

To change the sound sensitivity on the Shocker™ Panel 180 USB, follow the instructions

below:

1. Press <MENU> repeatedly until SenS shows on the display.

2. Use <UP> and <DOWN> to increase or decrease the sound sensitivity (u 0–u100).

3. Press <ENTER>. The product will return to the last selected mode.

Temperature

To view the current temperature of the Shocker™ Panel 180, follow the instructions below:

1. Press <MENU> repeatedly until teMP shows on the display.

2. Press <ENTER>.