USER MANUAL
Edition Notes The Rogue Outcast 1 Hybrid User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Rogue Outcast 1 Hybrid. Trademarks CHAUVET, the Chauvet logo, and Rogue Outcast 1 Hybrid are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Table of Contents TABLE OF CONTENTS 1. Before You Begin ....................................................................... 3 What Is Included ........................................................................................... Claims ........................................................................................................... Manual Conventions ..................................................................................... Symbols ............................................
Table of Contents Tilt .................................................................................................................................. Dimmer........................................................................................................................... Color............................................................................................................................... Gobo ..........................................................................................
BEFORE YOU BEGIN 1. Before You Begin What Is Included • • Rogue Outcast 1 Hybrid Neutrik® powerCON® power cord • • 2 Omega brackets with mounting hardware Quick Reference Guide Claims Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition. If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet.
BEFORE YOU BEGIN Mounting and Rigging • • • • • • • • The product is intended for professional use only. IP65, temporary outdoor/wet use CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
INTRODUCTION 2. Introduction Description The Rogue Outcast 1 Hybrid is an outdoor-ready, IP65 spot/beam/wash moving head ideal for small to medium festivals and events. Powered by an intense 400W lamp, Rogue Outcast 1 Hybrid delivers a 6500 K output with tight beam angles of 1° to 5° in Beam Mode and a zoom range of 2.2° to 29.1° in Spot Mode and 4.9° to 28.3° in Wash Mode for maximum visual impact.
INTRODUCTION Product Dimensions 14.37 in 365 mm 10.15 in 258 mm 9.02 in 229 mm 30.16 in 766 mm 4.6 in 117 mm 19.88 in 505 mm 4.50 in 114 mm 15.91 in 404 mm 18.6 in 471 mm 25.6 in 649 mm Page 6 of 32 12.2 in 310 mm Rogue Outcast 1 Hybrid User Manual Rev.
SETUP 3. Setup AC Power Each Rogue Outcast 1 Hybrid has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Rogue Outcast 1 Hybrid, refer to the label affixed to the product. You can also refer to the Technical Specifications chart in this manual. The listed current rating indicates the maximum current draw during normal operation. For more information, download Sizing Circuit Breakers from the Chauvet website: www.
SETUP Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/. Orientation Always mount this product in a safe position, making sure there is adequate room for ventilation, configuration, and maintenance. Rigging Chauvet recommends using the following general guidelines when mounting this product.
SETUP Lamp Replacement The Rogue Outcast 1 Hybrid is equipped with an USHIO NSL 400-W lamp. Follow the procedure below to safely change the lamp, ! Disconnect the product from power before opening. Procedure 1. 2. 3. 4. 5. 6. ! Turn the product off and disconnect it from power. Wait at least 15 minutes for the lamp to cool down. Remove both head covers by removing 8 Phillips-head ¼-turn screws. Orient the bottom of the moving head so that the fan is facing downward.
OPERATION 4. Operation Control Panel Operation Button
OPERATION Menu Map Refer to the Rogue Outcast 1 Hybrid product page on www.chauvetprofessional.com for the latest menu map. Main Level Programming Levels Address 001–512 20CH 25CH Auto Test Pan Pan Fine Tilt Tilt Fine P/T Speed Dimmer Dimmer Fine Shutter Color Gobo 2 Gobo Gobo Rotate Focus Focus Fine Prism1 Prism1 Rotate Prism2 Prism2 Rotate Frost1 Frost2 P/T Macro P/T Ma. Speed Special Function DMX Running Mode Manual Test Rogue Outcast 1 Hybrid User Manual Rev.
OPERATION Main Level Programming Levels NO YES NO YES NO YES AUT 540 360 180 270 180 90 NO YES NO YES NO YES Pan Reverse Tilt Reverse Screen Reverse Pan Angle Tilt Angle BL.O.P/T Move BL.O.Color Move BL.O.
OPERATION Main Level Programming Levels Description Pan/Tilt Shutter/ Prism Color Reset Function NO/YES Gobo Setup Frost/ Focus All Factory Setting Sys Info Display Ver PanTilt Ver Prism Ver Gobo Ver Other Ver Running Mode DMX Address Lamp On Time Remain Time Temperature1 Temperature2 Voltage Current Power Fan Speed Fan 1–5 UID NO YES V_ ___ ___ ___ _____ _____ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ _____________ Rogue Outcast 1 Hybrid User Manual Rev.
OPERATION DMX Values 25CH Channel Function 1 2 3 4 5 6 7 Pan Fine pan Tilt Fine tilt Pan/tilt speed Dimmer Fine dimmer 8 Strobe 9 Color wheel Page 14 of 32 Value 000 000 000 000 000 000 000 000 008 016 132 168 204 240 248 000 004 008 012 016 020 024 028 032 036 040 044 048 052 060 188 220 224 255 255 255 255 255 255 255 007 015 131 167 203 239 247 255 003 007 011 015 019 023 027 031 035 039 043 047 051 059 187 219 223 255 Percent/Set
OPERATION Channel Function 10 Gobo wheel 1 Value 000 003 004 006 007 009 010 012 013 015 016 018 019 021 022 024 025 027 028 030 031 033 034 036 037 039 040 042 043 059 060 063 064 067 068 071 072 075 076 079 080 083 084 087 088 091 092 095 096 099 100 103 104 107 108 111 112 127 128 189 190 193 194 255 Rogue Outcast 1 Hybrid User Manual Rev.
OPERATION Channel Function 11 Gobo wheel 2 12 Gobo wheel 2 rotate Value 000 006 012 018 024 030 036 042 048 054 064 074 080 086 092 098 104 110 116 122 128 192 000 064 148 005 011 017 023 029 035 041 047 053 063 073 079 085 091 097 103 109 115 121 127 191 255 063 147 231 232 255 13 14 15 16 Focus Focus fine Zoom Zoom fine 17 Prism 1 18 Prism 1 rotate 19 Prism 2 20 Prism 2 rotate 21 Frost 22 Beam defraction Page 16 of 32 000 000 00
OPERATION Channel Function 23 Movement macros 24 Movement macro speed Value 000 008 016 024 032 040 048 056 064 072 080 088 096 104 112 120 128 136 144 152 160 168 176 184 192 200 208 216 224 232 240 248 000 Rogue Outcast 1 Hybrid User Manual Rev.
OPERATION Channel Function 25 Control Page 18 of 32 Value 000 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 009 019 029 039 049 059 069 079 089 099 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 255 Percent/Setting No function Defogging fan, slow to fast Defogging fan off Dimmer conventional mode Dimmer linear mode Pan/tilt fast mode Pan/tilt normal mode Blackout during pan/tilt (3 se
OPERATION 20CH Channel Function 1 2 3 4 5 6 Pan Fine pan Tilt Fine tilt Pan/tilt speed Dimmer 7 Strobe 8 Color wheel Value 000 000 000 000 000 000 000 008 016 132 168 204 240 248 000 004 008 012 016 020 024 028 032 036 040 044 048 052 060 188 220 224 Rogue Outcast 1 Hybrid User Manual Rev.
OPERATION Channel Function 9 Gobo wheel 1 Page 20 of 32 Value 000 003 004 006 007 009 010 012 013 015 016 018 019 021 022 024 025 027 028 030 031 033 034 036 037 039 040 042 043 059 060 063 064 067 068 071 072 075 076 079 080 083 084 087 088 091 092 095 096 099 100 103 104 107 108 111 112 127 128 189 190 193 194 255 Percent/Setting Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Gobo 10 Gobo 11 Gobo 12 Gobo 13 Open Gobo
OPERATION Channel Function 10 Gobo wheel 2 11 Gobo wheel 2 rotate Value 000 006 012 018 024 030 036 042 048 054 064 074 080 086 092 098 104 110 116 122 128 192 000 064 148 005 011 017 023 029 035 041 047 053 063 073 079 085 091 097 103 109 115 121 127 191 255 063 147 231 232 255 12 13 Focus Zoom 14 Prism 1 15 Prism 1 rotate 16 Prism 2 17 Prism 2 rotate 18 Frost 19 Beam defraction 000 000 000 005 000 128 190 194 000 00
OPERATION Channel Function 20 Control Page 22 of 32 Value 000 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 009 019 029 039 049 059 069 079 089 099 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 255 Percent/Setting No function Defogging fan, slow to fast Defogging fan off Dimmer conventional mode Dimmer linear mode Pan/tilt fast mode Pan/tilt normal mode Blackout during pan/tilt (3 se
OPERATION Color Wheel The Rogue Outcast 1 Hybrid includes one color wheel with 13 fixed colors plus open (white), as indicated below. The diagram shows the color on the wheel, as mentioned in the DMX Values tables. UV RED ORANGE CTO 6500K CTO 5600K CYAN LIGHT GREEN BLUE DARK YELLOW DARK BLUE Rogue Outcast 1 Hybrid User Manual Rev.
OPERATION Gobo Wheel The Rogue Outcast 1 Hybrid includes one static gobo wheel with 13 fixed gobos plus open, and one rotating gobo wheel with 9 gobos. The diagram shows the gobo number on the wheel as numbered in the DMX Values tables. 11 11 13 10 9 8 1 7 2 6 3 4 5 Gobo Wheel 1 9 1 8 2 7 3 6 5 4 Gobo Wheel 2 Page 24 of 32 Rogue Outcast 1 Hybrid User Manual Rev.
OPERATION Configuration (Standalone) Use the standalone configuration to operate the product without a DMX controller. Run Mode This programming level sets the DMX personality and controls the different test modes. • Starting from the Main Level screen, select Run Mode, press . Auto Test This option runs every attribute individually through one cycle. • Highlight Auto Test, press . The Auto Test will end after one full cycle. You can stop the test by pressing
OPERATION Lamp Controls This programming level allows the user to change a range of options that control the action of the lamp. • Starting from the Setup screen level, select Lamp Settings, press . Lamp settings This option turns the lamp on and off. 1. Highlight On/Off, press . 2. Select YES or NO, press .
OPERATION Maintenance timer reset This procedure resets the lamp maintenance timer to 0. It is recommended that this be done after every lamp change. 1. Highlight Remain Time, press . 2. Select 010–250, press . Reset Function This programming level allows the user to reset individual functions to the home position. • Starting from the Setup screen level, select Reset Function, press . Pan/Tilt Reset This option resets the pan/tilt functions to the home position. 1.
OPERATION Offset Mode The Offset mode provides fine adjustments for the home position of all the moving parts in the optical path as well as the pan and tilt movements. This way, when in their home position, the moving parts do not show any border or reduce the light output. 1. Starting from the Main Level screen, press and hold
TECHNICAL 5. Technical Information Product Maintenance To maintain optimum performance and minimize wear, clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. Clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear. To clean the product: 1. Unplug the product from power. 2.
TECHNICAL SPECIFICATIONS 6. Technical Specifications Dimensions and Weight Length 15.91 in (404 mm) Width 12.2 in (310 mm) Height 30.16 in (766 mm) Weight 83.8 lb (38 kg) Note: Dimensions in inches rounded to the nearest hundredth. Power Power Supply Type Switching (internal) Range 100 to 240 VAC, 50/60 Hz Voltage Selection Auto-ranging Parameter Consumption Operating Current Fuse 120 V, 60 Hz 384 W 3.18 A F 7 A, 250 V 230 V, 50 Hz 382 W 1.
RETURNS Returns Send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will not issue call tags. Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA number.
CONTACT US Contact Us General Information Technical Support Chauvet World Headquarters Address: 5200 NW 108th Ave. Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll Free: (800) 762-1084 Voice: (844) 393-7575 Fax: (954) 756-8015 Email: chauvetcs@chauvetlighting.com Website: www.chauvetprofessional.com Chauvet Europe Ltd Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0) 1773 511115 Fax: +44 (0) 1773 511110 Email: UKtech@chauvetlighting.