User's Manual

EN Freedom™ Par Tri-6 QRG
3
What is
Included
• Freedom™ Par Tri-6
• Power Cord
• Warranty Card
• Quick Reference Guide
To Begin
Unpack your Freedom™ Par Tri-6 and make sure you have received all
parts
in good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
Description
The Freedom™ Par Tri-6 is a wireless, battery-operated, tri-color LED Par
with a built-in D-Fi™ transceiver. It works with the
FlareCON™ app and
IRC-6 for wireless triggering and control. You can wirelessly
master/slave
this fixture with other Freedom™ fixtures for a coordinated light show.
Shine
light where it is needed using the built-in adjustable kickstand.
Extend the
battery’s lifespan with built-in discharge protection.
Safely store and
transport your fixtures from gig to gig in the CHS-FR4 carry bag
available
from CHAUVET®. The Freedom™ Par Tri-6’s c
ompact and lightweight
design easily fits inside sticks of TRUSST®.
Overview
AC Power
This product has an auto-
ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
For the maximum number of Freedom™ Par Tri-6 products
that you can
power link at each voltage, see the User Manual or the sticker on the product.
Fuse
Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Infrared Sensor
On/Off
Switch
Display
DMX Out
DMX In
Menu
Buttons
Power Out
Power In
Fuse Holder
Battery Life
Indicator LEDs
Kickstand
Carry
Handle
Glare
Shield
Microphone
D-Fi™ AUTO
Sync/Clear Button