LEDsplash™ 200B LEDPAR200B Snapshot Use on Dimmer Outdoor Use Sound Activated DMX Master/Slave Auto-ranging Power Supply Replaceable Fuse User Serviceable Duty Cycle User Manual CHAUVET, 3000 N 29th Ct, Hollywood, FL 33020 U.S.A (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.
TABLE OF CONTENT 1. BEFORE YOU BEGIN ................................................................................................................................................... 3 WHAT IS INCLUDED .......................................................................................................................................................................................................... 3 UNPACKING INSTRUCTIONS ................................................................................
1. BEFORE YOU BEGIN What is included 1 x LED-PAR200B 1 x Warranty Card 1 x Users Manual Unpacking Instructions Immediately upon receiving a product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
2.
Product Overview Power Input (Hardwired cable) Satellite™ connection Power LED Indicator Safety attachment point Microphone Sensitivity Adjustment Knob Fuseholder DMX, Master/Slave Signal LED Indicator Bracket Adjustment Knob Standalone Auto/Sound Selection Switch DIP Switches DMX Out Bracket Adjustment Knob DMX In LED-PAR200B User Manual 5 2010-03-09/15:03
Introduction 3. SETUP Power Warning! All fixtures must be connected to circuits with a suitable Earth Ground. To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating is its average current draw under normal conditions.
4. OPERATING INSTRUCTIONS The LEDsplash™ 200B is a DMX controllable, full RGB color mix par can made up of highly efficient and super bright LEDs. All red, green and blue LEDs can be controlled separately allowing the creation of an unlimited range of colors. The LEDsplash™ 200B can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing six DMX channels. Master/Slave Mode This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto Mode.
Appendix DMX Control Mode Operating in a DMX Control mode environment gives the user the greatest flexibility when it comes to customizing or creating a show. In this mode you will be able to control each individual trait of the fixture and each fixture independently. The LEDsplash™ 200B uses six channels of control. 1. A working DMX signal source plugged into the LEDsplash™ 200B activates the DMX mode. Setting the DMX address This DMX mode enables the use of a universal DMX controller device.
Appendix 5. APPENDIX DMX Primer There are 512 channels in a DMX connection. Channels may be assigned in any manner. A fixture capable of receiving DMX-512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total number of channels required. Choosing a start address should be planned in advance.
Appendix DMX Channel Values NOTE! Please read all instructions carefully on fixture DMX control mode and addressing. DMX channels 2, 3, 4, 5 and 6 functions are determined by the current settings of channel 1.
Appendix Returns Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call CHAUVET® and request RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.
DMX DIP Switch Quick Reference Chart DMX Address Quick Reference Chart DIP Switch Position DMX DIP SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=OFF #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=ON #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X=OFF or ON #6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 #1 #2 #3 #4 #5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 1 0 0 0 0 1 33 65 97 129 161 193 225 257 289
Appendix Technical Specifications WEIGHT & DIMENSIONS Length .......................................................................................................................... 132 mm (5.2 in) Width............................................................................................................................ 249 mm (9.8 in) Height .......................................................................................................................... 236 mm (9.3 in) Weight.............