User Guide

Page 26 of 29 Intimidator™ Wash Zoom 250 IRC User Manual Rev. 1
5. TECHNICAL INFORMATION
Product
Maintenance
Dust build-up on the lens reduces light output. Dust build-up on the body and fans can
cause overheating
and mechanical wear, which can reduce the usable life of the
product.
To maintain optimum performance and minimal wear in a normal environment, clean the
product at least twice a month.
If the environment is particularly dusty, clean the product
more often.
For best results follow the suggestions listed below:
• Never clean the product when it is plugged into a power source.
• Only clean the product when it is at room temperature.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surfaces and in the vents.
• Use a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol to clean
all the external optics and glass or transparent surfaces.
• Apply the cleaning solution directly to a soft, lint-free cotton cloth or a lens cleaning
tissue.
• Gently wipe dirt and grime to the outside edges of the external optics and glass or
transparent surfaces.
• Gently polish the external optics and glass or transparent surfaces until they are
free of haze and lint.
Always dry the external optics and glass/transparent
surfaces carefully after
cleaning them.
Do not spin the cooling fans while blowing compressed air into them.