User Guide

Q-Wash™ 260-LED QRG EN
4
Menu Options
Main Level
Programming Levels
Description
INTRO
ADDRESS
001~512
Selects a starting DMX address
RESET
YES
Resets product’s custom settings
NO
FANS
HIGH
Select the fan’s operation mode
NOTE: Product’s controller will force the fan to
High if the product’s internal temperature
becomes too high, despite any manual or DMX
setting
NORMAL
LOW
AUTO
RUN
DMX512
Selects DMX running mode
AUTO1
Selects the first automatic program
AUTO2
Selects the second automatic program
CUSTOM
Selects the user customizable program
SOUND1
Selects the first sound program
SOUND2
Selects the second sound program
SLAVE
Selects the Slave running mode
TEST
Starts the product’s test sequence
CHANNELS
BASIC
Selects the 9-channel DMX mode
ADVANCED
Selects the 12-channel DMX mode
DISPLAY
60_CLOSE
Turns off display after 60 seconds
BRIGNT
Keeps the display on
KEYLOCK
YES
Activates/deactivates the control panel password
NO
DIMMER
DIMMER4~1
Slow (DIMMER4) to fast (DIMMER1) dimmer
curves
DIMMER0
Linear dimmer
INFO
Edition
Shows the installed S/W version
INVERT
PAN
NORMAL/
REVERSE
Defines the pan direction
TILT
Defines the tilt direction
DIMMER
Defines the dimmer fader direction
USE
YES
Activates the changes
NO
RANGE
P/START
000~255
Sets the pan start point
P/FINISH
Sets the pan end point
T/START
Sets the tilt start point
T/FINISH
Sets the tilt end point
USE
YES
Activates the changes
NO
SPECIAL
BLACKD
YES
Activates the move-in black delay (3 s)
NO
RESET
DMX
Allows controller to reset product
SYSTEM
The control panel can reset the product
POWER
NORMAL
LEDs illuminate at normal or high intensity
HIGH
COLOR
UC
Output matches older products
RGBTOW
Output set by RGBTOW
OFF
Output defined by RGBW faders
FAN
DMX
Allows controller to set fan speed
SYSTEM
Control panel sets fan speed
DMXERROR
SAVE
Save the last look when DMX is lost
BLAK
Goes to black when DMX is lost