User manual

Page 12 of 17 4BAR™ Tri User Manual Rev. 7
Preset Colors
To select one of the preset static colors, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select C 1–C 7.
• C 1 - red
• C 2 - green
• C 3 - blue
• C 4 - cyan
• C 5 - magenta
• C 6 - yellow
• C 7 - white
4. Press <ENTER>.
Automatic
Programs
To enable the Automatic programs, follow the instructions below:
1. Press <MENU> repeatedly until P 1–P 6 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to adjust the auto program speed (S 1–S100).
4. Press <ENTER>.
RGB Color Mixing
To enable custom color mixing, do the following:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and rxxx (red), gxxx (green), or bxxx (blue) shows on the
display.
3. Use <UP> or <DOWN> to select x 0–x100 (0–100%) for the selected color.
4. Press <ENTER> to go to the next color.