User manual

4BAR™ Tri User Manual Rev. 7 Page 13 of 17
Footswitch
Operation
The included footswitch provides quick access to preset colors, color-
change programs,
and sound-activation through the 4BAR™ Tri microphone.
To use the footswitch:
1. Power the product on.
2. Connect the footswitch to the 4BAR™ Tri with the 4-pin connection cable with plug.
3. Press pedal #1 (Preset) to activate control. When working, all the LEDs will light
white, which is the first function of pedal #1.
4. Use the chart below to activate the desired function.
To disconnect the footswitch:
1. Unplug the footswitch from the 4BAR™ Tri.
2. Unplug the power cable from the 4BAR™ Tri.
3. Power the 4BAR™ Tri again to operate without the footswitch.
Pedal Sub-option
Function
1
Preset
1 x press
White
2 x press
Red
3 x press
Green
4 x press
Blue
5 x press
Yellow
6 x press
Magenta
7 x press
Cyan
8 x press
Color change every second in a continuous loop
9 x press
Color change every 3 seconds in a continuous loop
2
Sound
N/A Sound-Active
3
Blackout
N/A Immediately turns off all the LEDs
The 4BAR™ Tri footswitch will work properly in any mode. No settings needs to
be modified before using the footswitch.