User manual

Page 8 of 17 4BAR™ Tri User Manual Rev. 7
Mounting
Before mounting the product
, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The 4BAR™ Tri
may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the Technical Specifications
).
• When mounting the product overhead, always use a safety cable.
Mount the
product securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, you should use mounting clamps of
appropriate weight capacity.
• The adjustment knobs allow for directional adjustment when aiming the product to
the desired angle. Only loosen or tighten the bracket knobs manually. Using tools
could damage the knobs.
• When mounting to the tripod, be sure the stand is tightened properly and leveled.
Mounting Diagram
Clamp Hanging Bolts
Tripod Insertion Point