User manual

Intimidator™ Spot 100 IRC User Manual Page 9 of 20
4. OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button
Function
<MODE/ESC>
Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Menu Map
Mode
Programming Steps
Description
DMX Mode
d001—d512
Selects the DMX starting address
Operating
Mode
SLAV (Son)
Slave operating mode
NASL (SLoU)
Automatic mode, slow program
NAFA (FASt)
Automatic mode, fast program
NStS (Srun)
Sound-Active mode
NSti
NodE
Soun
Sound-Active movement macro
Auto
Automatic movement macro
NoSP
000—255
Movement macro speed, fast to slow
NoSE
00—09
Sound sensitivity, high to low
NoPr
01—09
Movement macro 1—9
LEd
on
LED on
oFF
LED off
diMM
000—255
Dimmer, 0—100%
SHut
00—20
Strobe, 0—20 Hz
Gobo
00—09
Selects gobo
GoSP
000—100
Sets gobo cycle effect speed, slow to fast
CoLr
00—09
Selects color
CoSP 000—100
Sets color cycling rainbow effect speed,
slow to fast
Pan
PAn
Normal pan operation
rPAn
Inverse pan operation
Tilt
tit
Normal tilt operation
rtit
Inverse tilt operation
Display
diS
Normal display
rdiS
Inverse display
Channel
Mode
6-CH
Selects the 6-channel DMX personality
11CH
Selects the 11-channel DMX personality
Manual Pan
Range
PA54
Selects the 540° pan angle range
PA36
Selects the 360° pan angle range
PA18
Selects the 180° pan angle range
Manual Tilt
Range
ti27
Selects the 270° tilt angle range
ti18
Selects the 180° tilt angle range
ti 9
Selects the 90° tilt angle range
Temperature
Display
tC__ Displays LED temperature
Reset
rESt
Resets fixture
Load
LoAd
Load factory defaults
While in NSti mode, the Intimidator™ 100 IRC also responds to the IRC. When
using the IRC in this mode, changes in programming levels and settings will show
on the display.