User manual

Setup
Amhaze™ Studio User Manual Rev. 2 -7-
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
• The product is not intended for permanent installation.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
• When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to http://trusst.com/products/.
Procedure
The Amhaze™ Studio has a threaded mounting hole, size M12, at the top of the hazer. This
mounting hole is appropriate for use with a mounting clamp. You must supply your own
mounting clamps, so be sure the clamp is capable of supporting the weight of this product. For
our CHAUVET® Professional line of mounting clamps, go to http://trusst.com/products/.
Mounting Diagram
Floor Mounting
Overhead Mounting
Safety Cable
M12 Mounting Clamp