User manual

Setup
-6- Amhaze™ User Manual Rev. 05
DMX Linking
You may link the Amhaze™ to a DMX controller using a standard DMX serial connection. If
using other DMX compatible units with this product, it is possible to control them
individually with a single DMX controller.
DMX Mode
The Amhaze™ uses the standard DMX data connection for the 2-Channel DMX mode.
Refer to the Introduction
chapter for a brief description of this mode.
Refer to the Operation chapter to learn how to configure the Amhaze™ to work in this
mode.
The DMX Values section will provide you with detailed information regarding the DMX
modes.
Mounting
Before mounting this product, read and follow the Safety Notes in this manual.
Orientation
Always mount this product in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends following the general guidelines below when mounting this
product.
• When selecting an operation location, consider ease of access to this product for
operation, programming adjustments, and routine maintenance as well as the vicinity to
a suitable power outlet.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
• Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
• Never mount this product on a flammable or heat sensitive surface, such as carpet,
linoleum, wood, paper, carton, or plastic.
• Never hang this product, although product may be mounted to the top of truss with a
ratchet strap.
• Make sure that the place on which you mount this product can safely support its weight
without vibrations. See the Technical Specifications for weight and size details.
Procedure
The Amhaze™ comes in a stackable flight case. You only need to find a suitable place to
set it up.
Follow the instructions in the Preparation
section to setup the Amhaze™ once properly
located.