User manual

Setup
Amhaze™ User Manual Rev. 05 -5-
3. Setup
AC Power
This product comes in two models, each with a fixed input voltage power supplies, either
120 V, 60 Hz or 230 V, 50 Hz. Therefore, you have to order the correct model for the line
voltage in your area.
Make sure that you are connecting this product to the proper voltage, as per the
specifications in this guide or on the product’s sticker.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download the document Sizing the Circuit Breakers from the
CHAUVET® website: www.chauvetpro.com
.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Amhaze™ comes with a power input cord terminated with a Neutrik® powerCON® A
connector on one end an Edison plug on the other end (US market). If the power input cord
that came with your product has no plug or you need to change the plug, use the table
below to wire the new plug.
Connection
Wire (US)
Wire (Europe)
Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Disconnect this product from the power outlet before resetting the breaker.
Resetting the
Breaker
This product is equipped with a resettable circuit breaker on the power input circuit.
If the breaker trips, all sections of this product will lose power. Please see the instructions
below for resetting this breaker.
Remove the power cord from mains power. 1.
Allow unit to cool for 15 minutes. 2.
After 15 minutes, you may attempt to reset the breaker by pressing the button with 3.
your index finger.
Plug the product’s power cord into the power outlet and continue using as 4.
recommended.
If the breaker does not reset (the breaker button will not remain inserted), contact
CHAUVET® immediately, as this indicates a possible internal malfunction.