User manual

Page 10 of 19 Arena™ 2100 Flex User Manual (Rev. 05)
Configuration
(Standalone)
Set this product in one of the standalone modes to control without a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
Never connect a product that is operating in any standalone mode, whether
Static, Automatic, or Sound to a DMX string connected to a DMX controller. This
is because products in standalone mode may transmit DMX signals that could
interfere with the DMX signals from the controller.
Timer Mode
To enable the Timer mode, do the following:
1. Connect this product to a suitable power outlet
2. Turn this product on.
3. Press <FUNCTION> repeatedly until Interval Set shows on the display.
4. Use <UP> or <DOWN> to select the time in between haze.
5. Press <FUNCTION> repeatedly until Duration Set shows on the display.
6. Use <UP> or <DOWN> to select the duration of haze.
7. Press <FUNCTION> repeatedly until Timer Out shows on the display.
8. Use <UP> or <DOWN> to select the volume of haze.
9. Press <TIMER> to activate the mode with the above settings.
Volume Mode
To enable the Volume mode, do the following:
1. Connect this product to a suitable power outlet
2. Turn this product on.
3. Press <FUNCTION> repeatedly until Volume Out shows on the display.
4. Use <UP> or <DOWN> to select the volume of haze.
5. Press <VOLUME> to activate the mode with the above settings.