User manual

Page 8 of 19 Arena™ 2100 Flex User Manual (Rev. 05)

Mounting

Before mounting this product, read and follow the safety recommendations indicated in

the Safety Notes section (page 2 of this manual).

Orientation

The Arena™ 2100 Flex may be mounted in any position; however, make sure adequate

ventilation is provided around the product.

Rigging

 Before deciding on a location for this product, always make sure that it will be easy

to access the unit for maintenance and programming/ fluid replenishment purposes.

 Make sure that the structure or surface onto which you are mounting this product

can support its weight. Please see the Technical Specifications section of this

manual for weight information.

 When mounting this product overhead, always use a safety cable. Mount the

product securely to a rigging point, whether an elevated platform or a truss.

 When rigging this product onto a truss, you should use a mounting clamp of

appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for

this purpose.

 The bracket adjustment knobs allow for directional adjustment when aiming the

product to the desired angle. Only loosen or tighten the bracket knobs manually.

Using tools could damage the knobs.

MountingDiagram

When mounting, use either a clamp attached to the truss and a safety cable, or

use 3 safety cables attached to all 3 safety loops, located at the top of the product.

SafetyLoop(x3)

Bracket

AdjustmentKnob

MountingBracket

SafetyCable

MountingBracket