User manual

Atmos™ QRG EN
3
What Is
Included
• Atmos™
• Neutrik® powerCON® power cord
• Warranty Card
• Quick Reference Guide
AC Power
This product comes in two models, each with a fixed input voltage power supply,
either 120 V, 60 Hz or 230 V, 50 Hz. Be sure you have
the correct model for the
line voltage in your area.
To eliminate wear and improve its lifespan, during periods of non-
use
completely disconnect from power via breaker or by unplugging it.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Resetting the
Breaker
This product is equipped with a resettable circuit breaker. If the breaker trips, all
sections of this product will lose power. To reset the breaker:
1. Disconnect this product from power.
2. Allow unit to cool for 15 minutes.
3.
After 15 minutes, you may attempt to reset the breaker by pressing the button
with your finger.
4. Plug the product’s power cord into the power outlet and continue using as
recommended.
DMX Linking
The Atmos™ will work with a DMX controller using a 3- or 5-pin DMX serial
connection. A DMX Primer is available from www.chauvetprofessional.com.
DMX Connection
The Atmos™ uses a 3- or 5-pin DMX data connection for its 1 channel DMX
personality. See the User Manual for information about connecting
and
configuring the product for DMX operation.