User manual

B-250 Bubble Machine User Manual Rev. 7 Page 9 of 10
5. TECHNICAL INFORMATION
Product
Maintenance
Dust build-
up reduces output performance and can cause overheating. This can lead to
reduction of the product’s life and mechanical wear.
To maintain optimum performance
and minimize wear, you should clean your products frequently.
However, be aware that
usage and environmental conditions could be contributing factors
to increase the
cleaning frequency.
After every 40 hours of continuous ope
ration or when the machine will be idle for a long
time it is recommended to rinse the bubble wands and fluid tank with warm water to
prevent a build-up of residue which could reduce performance.
To clean the product, follow the instructions below:
1. While the product is unplugged, loosen the thumbscrew and lift cover to reveal the
fluid tank.
2. Empty all bubble fluid from the tank and replace with warm water.
3. Plug the product in and allow it to run as usual until all wands appear to be free of
residue.
Always dry the surfaces carefully after cleaning them.
Do not spin the fan using compressed air because you could damage it.
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
12.5 in (318 mm)
7 in (178 mm)
6.5 in (165 mm)
6.8 lb (3.1 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Tank Capacity
U.S.
UK/Europe
24 oz.
0.7 l
Power
Power Supply Type
Range
Voltage Selection
Voltage specific
120 V, 60 Hz or 230 V, 50 Hz
Fixed voltage
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
42 W
41 W
Operating current
0.5 A
0.2 A
Fuse
F 1 A, 250 V
F 1 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power Cord plug
Edison (US)
Local plug
Thermal
Maximum External Temp.
104 °F (40 °C)
Ordering
Product Name
Item Code
UPC Number
Bubble Machine
02070054
781462002008