CF-NEONB30 COLORflex™ Blue CF-NEONR30 COLORflex™ Red USER MANUAL th CHAUVET, 3000 N 29 Ct, Hollywood, FL 33020 U.S.A (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.
TABLE OF CONTENT BEFORE YOU BEGIN ...................................................................................................................................................... 3 WHAT IS INCLUDED................................................................................................................................................................................ 3 UNPACKING INSTRUCTIONS ..........................................................................................................
BEFORE YOU BEGIN What is included 30ft roll of blue or red COLORflex™ 2 pieces of the following items; Power cord/converter, End cap, Splice connector 15 Channel mounting clips 5 pieces of the following items; Male connecting pins type MCP-3 and MCP-2 Manual & Warranty Card Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
INTRODUCTION COLORflex™ is a professional linear lighting device using LED technology. It looks like Glass neon, but it is flexible, safer, and more durable, lasts longer and can be used outdoors. Only a few tools are required for field design and installation. COLORflex™ is ideal for permanent, fixed installations requiring minimum maintenance but can also be useful when adding last minute, creative, custom design details.
Introduction Components Overview LEDCF-POWER 1 1. Power cord and plug with AC/DC Recommended tools for installation and repairs converter Heater Gunn Part B Use male connector pin (MCP-2) LEDCF-SPLICE 1. Male connector pin (MCP-3) 2. Heat shrink tube 2 1 Cutter Part D LEDCF-CAP 1. End cap 1 LEDCF-CLIP Solder gun Part F 1. Channel clip 2. Screws (2) 2 1 LEDCF-X 1. X connector 2. Male connector pin (MCP-2) 1 Solder Part G 2 LEDCF-L 1 1. L connector 2.
INSTALLATION The COLORflex™ LED Neon is a versatile and user friendly linear lighting device; it can be cut and bent and formed in the field and easily installed on flat surfaces of varied materials, such as wood, plastic, steel, or on walls to form all kinds of pattern according to your design. Please follow the following pre-installation guidelines; 1. Mark centerlines or draw outlines of your pattern on the installation surface. 2.
Appendix 90° Installation Continuous 90° run. 90° run using the L connector.
Appendix REPAIR INSTRUCTIONS STEPS 1) Wear anti-static strap (Part A) or a similar device and connect it to earthed metal equipment. 2) Insert another end of needle like connector (Part C) into LED Neon to locate the problematic point. If the problem section lights up then the faulty point has been located.
Appendix 3) Unplug the power source. Use cutter (Part D) and pincer (Part E) to open up the PVC and fix the faulty parts inside. 4) Re-solder the components (Part F & G). Plug in the power source to re-confirm the faulty part is fixed.
Appendix 5) Put back all of the parts into the LED Neon-Flex. 6) Use heater (Part B) to soften the PVC. Use flat & clean materials to press on the softened PVC to make the opening stick back. 7) Use cutter (Part D) to cut off the excessive PVC. 8) Plug in the power source to reconfirm the faulty part is fixed.
APPENDIX Returns Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.
Appendix Technical Specifications WEIGHT & DIMENSIONS Linear device..................................................................................... .47 in x 1.02 in (12 mm x 26 mm) Carton Size ........................................................... 16.34 in x 16.34 in x 10.24 in (415 x 415 x 260mm) Carton Weight ......................................................................................................... 37.9 lbs (17.2 Kgs) Net Weight ..................................................
Appendix COLORflex™ WARRANTY INFORMATION We take great pride in the quality, value and performance of our products and believe that it should offer you trouble free operation throughout its lifetime providing you take care to follow the simple instructions in this manual. LIMITED WARRANTY USA CHAUVET provides, from the date of purchase, to the original purchaser, a 12-month limited warranty on COLORflex™.