User's Manual

B-50 Lil’ Bubbler™ QRG
Page 4 of 4
Operation
1. Place the Lil’ Bubbler™ on a level surface and remove the thumbscrew
on the front of the unit for fluid tank access. Lift the cover.
2. Fill the tank with bubble fluid.
Note: CHAUVET® bubble fluid (BJU) is specially formulated for
use with CHAUVET bubble machines.
3. Lower the cover and re-tighten screw.
4. Plug into a suitable wall outlet.
5. Turn on the bubbler.
Note: Do not leave unused fluid in the reservoir for an extended
period. The fluid may thicken.
Contact Us
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
United Kingdom and Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Outside the U.S., United Kingdom, or Ireland, contact your distributor of
record (see the CHAUVET® website). Follow their instructions to request
support or to return a product.
Lil’ Bubbler™ QRG – Rev. 2
© Copyright 2012 CHAUVET®
All rights reserved
Printed in the P. R. C.