Specifications

Cirrus™ User Manual 4 8/18/2011
Safety Instructions
Please read the following notes carefully because they include important safety
information about the installation, usage, and maintenance of this product.
 Please keep this User Manual for future consultation. If you sell the unit to another user,
be sure that they also receive this instruction booklet.
 Always make sure that you are connecting to the proper voltage, and that the line voltage
you are connecting to is not higher than that stated on the decal or rear panel of the
product.
 This product is intended for indoor use only! To prevent risk of fire or shock, do not expose
product to rain or moisture.
 Make sure there are no flammable materials close to the unit while operating.
 The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
 Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse size and rating.
 Secure product to fastening device using a safety chain.
 Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate product at
temperatures higher than this.
 In the event of a serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center.
 Never connect the device to a dimmer pack.
 Make sure the power cord is never crimped or damaged.
 Never disconnect the power cord by pulling or tugging on the cord.
 Avoid direct eye exposure to the light source while it is on.
 Lasers can be hazardous and have unique safety considerations. Permanent eye injury
and blindness is possible if lasers are used incorrectly. Pay close attention to each safety
REMARK and WARNING statement in the user manual. Read all instructions carefully
BEFORE operating this device.
 Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to
direct laser light.
 This laser product can potentially cause instant eye injury or blindness if laser light
directly strikes the eyes.
 It is illegal and dangerous to shine this laser into audience areas, where the audience or
other personnel could get direct laser beams or bright reflections into their eyes.
 It is a US Federal offense to shine any laser at aircraft.
 Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
 There are no user serviceable parts inside the unit. Do not open the housing or attempt any
repairs yourself. In the unlikely event your unit may require service, please contact the
dealer nearest to you.
 Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to
direct laser light.