Manualshelf

User manual

ManualsBrandsChauvet ManualsLightingCOLORstrip
11121314151617181920
4. Operating Instructions 12 8/9/2010 11:50 AM
Automatic
This fixture has preprogrammed chases. These are accessed via the control panel. The speed
may be adjusted for the chases. Please see the instructions below for further explanation.
1. Press <Mode> until
Act
or
SYS
appears on the LED screen.
2. Using <Up> & <Down>, select
Act
.
3. Press <Enter>.
4. Using <UP> and <DOWN>, select the desired program (
A008
~
020
).
5. Press <Enter> until
P
_
000
~
100
appears on the LED screen.
6. Using <UP> and <DOWN>, select the desired program speed (slow to fast) between
P001
~
050
.
7. Press <Enter>.
8. Press <MENU> until
P000
~
100
appears on the LED screen.
9. Press <Enter> until
F000
~
100
appears on the LED screen (
A008
~
011
only).
10. Using <UP> and <DOWN>, select the desired strobe speed.
11. Press <Enter>.
Strobe speed of 000 disables the function.
Sound-Active
This fixture has sound-active chases. These are accessed via the control panel. The microphone
sensitivity may be adjusted using the microphone sensitivity adjustment knob. Please see the
instructions below for further explanation.
8. Press <Mode> until
Act
or
SYS
appears on the LED screen.
9. Using <Up> & <Down>, select
Act
.
10. Press <Enter>.
11. Using <UP> and <DOWN>, select the desired program (
A008
~
020
).
12. Press <Enter> until
P000
~
100
appears on the LED screen.
13. Using <UP> and <DOWN>, select the run speed between
P
051
~
100
to set the fixture into
sound-active mode.
14. Press <Enter>.
15. Press <MENU> until
P000
~
100
appears on the LED screen.
16. Press <Enter> until
F000
~
100
appears on the LED screen (
A008
~
011
only).
17. Using <UP> and <DOWN>, select the desired strobe speed.
18. Press <Enter>.
Strobe speed of 000 disables the function.
Static Colors
This fixture has sound-active chases. These are accessed via the control panel. The microphone
sensitivity may be adjusted using the microphone sensitivity adjustment knob. Please see the
instructions below for further explanation.
1. Press <Mode> until
Act
or
SYS
appears on the LED screen.
2. Using <Up> & <Down>, select
Act
.
3. Press <Enter>.
4. Using <UP> and <DOWN>, select the desired program (
A001
~
007
).
5. Press <Enter> until
F000
~
100
appears on the LED screen (
A008
~
011
only).
6. Using <UP> and <DOWN>, select the desired strobe speed.