User manual

4. Operating Instructions 9 8/9/2010 11:50 AM
4. OPERATING INSTRUCTIONS
B
UTTON FUNCTION
<Mode>
Used to activate Mode
selection and to back out of
the current Function 1 or 2.
<Enter>
Used to select a value and
store it to memory
<Up>
Used to select increasing
advancement in the value
<Down>
Used to select decreasing
advancement in the value
The Control Panel shows the current state of the unit. It is used to select the operating
mode, as well as the sub-features. For a detailed layout of the control panel functions,
please see the “menu map” section below.
Mode Function 1 Function 2 Description Run Speed (P) Strobe Speed (F) (C)
ACt A000
000
Blackout
001
Red
000~100
002
Green
000~100
003
Blue
000~100
004
Yellow
000~100
005
Purple
000~100
006
Cyan
000~100
007
White
000~100
008
Color change 1
Auto
000~050
Sound-Active
051~100
000~100
009
Color change 2
000~100
010
Color change 3
000~100
011
Color change 4
000~100
012
Color change 5
013
Color change 6
014
Sequential color Chase 1
015
Sequential color Chase 2
016
Sequential color Chase 3
017
Sequential color Chase 4
018
Sequential color Chase 5
019
Sequential color Chase 6
020
Sequential color Chase 7
021
RGB
Red: 000~100 Green: 000~100 Blue: 000~100
022
Color fade
000~100
023
Sound-Active (Auto Run)
SYS
SdAd
DMX Address
001~509
AAAd
Reset