Manualshelf

User guide

ManualsBrandsChauvet ManualsDJ EquipmentCOLORtube
123456
Note 1.
Color Combinations Available and value
0. Red & Green 10. Green & White
1. Red & Yellow 11. Yellow & Blue
2. Red & Blue 12. Yellow & Purple
3. Red & Purple 13. Yellow & Cyan
4. Red & Cyan 14. Yellow & White
5. Red & White 15. Blue & Purple
6. Green & Yellow 16. Blue & Cyan
7. Green & Blue 17. Blue & White
8. Green & Purple 18. Purple & Cyan
9. Green & Cyan 19. Purple & White
20. Cyan & White
Note 2.
Before setting the address for the tubes, the sytem must be fully configured and powered. The set up option under sytem mode
has 3 choices:
Set Address:
Yes (up button) - This button must be pressed anytime that there is a change in tube configuation or a tube is replace.
No (down button) -
Tube Amount:
Set the number of tubes in the system. This number must be reset any time that there is a change in the connection, either the
number of the tubes or a change in the order of the tubes. Once the number of tubes is set, the address is stored in the memory
chip in the COLORtube
Note 3.
The unit can be controlled by CHAUVET’s DMX-6, DMX-40, DMX-50, TIGER,ShowXpress or any universal DMX controller. When
the DMX address is set to 0, the system will be controlled by the LED-CHV controller. The system will be controlled by the DMX
controller when the address is set to a value between 1 to 508. Please consult your DMX controller manual for the proper address
to select. The COLORtubes are a 4 channel DMX fixture. To exit the DMX mode and return control to the LED-CHV, the DMX
address must be set to 0.
DMX Channel Configuration
Channel 1
Value Option Value Option
0-12 Blackout 130-142 Slow Flow 2
13-25 Red 143-155 Roll Chase 1
26-38 Green 156-168 Roll Chase 2
39-51 Yellow 169-181 Multicolor
52-64 Blue 182-194 Fast Flow 1
65-77 Purple 195-207 Fast Flow 2
78-90 Cyan 208-220 2 Color Chase
91-103 White 221-233 2 Color Flow
104-116 Color Change 234-246 Color Fade
117-129 Slow Flow 1 247-255 Auto Run
Channel 2
Speed Setting 0-255 from 1 step / minute to 100 steps / second
Channel 3
Flash Setting 0-255 from 0 to 20Hz - Off is 255