User manual

Page 10 of 23 CORE™ 3x3 User Manual Rev. 1
Coffin Locks
The CORE™ 3x3 may be attached to another CORE™ 3x3 by using their coffin locks.
The coffin locks are for product alignment only and are not weight bearing. DO NOT
hang product using only the coffin locks.
1. Place one CORE™ 3x3 next to the other, making sure to align the coffin lock’s male
connector opening to the other product’s female connector opening.
2. Use the 5 mm Allen key to operate the locking mechanism. Once locked, the coffin
lock hooks hold the CORE™ 3x3 units together.
Note: To unlock the coffin locks, using the Allen key again, simply turn the key in the
opposite direction from how it was locked.
When attaching CORE™
3x3 products together using their coffin locks, be sure
each unit is independently mounted.
Coffin Lock Keyways