User Manual
TABLE OF CONTENTS 1. Before you Begin ................................................................................................................ 3 What Is Included .................................................................................................................................... 3 Unpacking Instructions .......................................................................................................................... 3 Claims ....................................................
1. BEFORE YOU BEGIN What Is Included Unpacking Instructions Claims Text Conventions • • • • DataStream™ 4 Power Cord Warranty Card Quick Reference Guide Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
Product at a Glance Use on Dimmer Outdoor Use Sound-Activated DMX Master/Slave Safety Notes Auto Programs Power Cord Replaceable Fuse User-Serviceable Duty Cycle x P P x x Please read the following Safety Notes carefully before working with this product. They include important safety information about its installation, usage, and maintenance. • • • • • • • • • • • • • • Page 4 of 12 x x x P P Always connect this product to a grounded circuit to avoid the risk of electrocution.
2. INTRODUCTION Product Overview DMX Signal Indicator DMX In 3 & 5 Pin DMX Link Out/Throughput LED ON Indicator Ears for Rackmount LED In Use Indicators Front View DMX Outputs Power In Fuse Holder M10 Threaded Insert Back View Product Dimensions 5.3 in 134 mm 1.8 in 46 mm 19 in 483 mm DataStream™ 4 User Manual Rev.
3. SETUP AC Power This product has an auto-ranging power supply and it can work with an input voltage of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for this product (power outlet and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Mounting Before mounting this product, read and follow the Safety Notes. Orientation The DataStream™ 4 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging Before deciding on a location for this product, always make sure that it will be easy to access the unit for maintenance and programming purposes. Make sure that the structure onto which you are mounting this product can support its weight.
4. OPERATION Operating Instructions This is a DMX splitter, and it is designed to distribute / boost the incoming DMX signal into 4 separate outputs. Each of the 4 outputs is electronically isolated from the others (with the exception of the “thru” or “link” output) and each output has 3- and 5-pin XLR sockets to choose from. Follow all DMX standards when using this device. DMX In DMX LINK OUT Throughput Setting up a DMX Serial Data Link 1. 2. 3.
5. APPENDIX General Maintenance To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month. Dust build up reduces performance and can cause overheating. This can lead to reduced life and increased mechanical wear. Be sure to power off the fixture before conducting maintenance. Unplug fixture from power.
6. TECHNICAL INFORMATION Technical Specifications Dimensions and Weight Length Width Height Weight 19 in (483 mm) 5.3 in (134 mm) 1.6 in (46 mm) 5.8 lb (2.6 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Rackmount Size 1U Power Thermal DMX Ordering Page 10 of 12 Power Supply Type Range Voltage Selection Switching (Internal) 100 to 240 VAC, 50/60 Hz Auto-ranging Parameter 120 V, 60 Hz 240 V, 50 Hz Consumption 3W 5W Operating current 0.01 A 0.
To return a product or request support: • • • • • If you live in the U.S., contact Chauvet World Headquarters (see Contact Us). If you live in the UK or Ireland, contact Chauvet Europe Ltd.(see Contact Us). If you live in Mexico, contact Chauvet Mexico (see Contact Us). If you live in Benelux, contact Chauvet Europe BVBA (see Contact Us). If you live in any other country, DO NOT contact Chauvet. Instead, contact your distributor of record.
CONTACT US WORLD HEADQUARTERS - Chauvet General Information Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084 Technical Support Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com World Wide Web www.chauvetlighting.com UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
