User manual

Page 12 of 28 WELL™ 2.0 User Manual Rev. 01
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or
sets the currently selected value in to the
current function
<UP>
Navigates upwards through the menu list
and increases the numeric value when in a
function
<DOWN>
Navigates downwards through the menu list
and decreases the numeric value when in a
function
Control Options
You can set the WELL™ 2.0 start address in the 001~512 DMX range. This allows for the
control of up to 42 fixtures in the 12-channel TOUR personality.
Programming
Refer to the Menu Map on page 17 to learn how the menu options relate to each other.
The menu map has a Menu Level and a variable number of programming levels for each
option.
To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select it. This will take you to the first programming level for
that option.
To select an option or value within the current programming level press <UP> or <DOWN>
until it shows on the display. Press <ENTER> to accept it. In this case, if there is another
programming level, you will see its first option. Otherwise, you will see the selected value.
To exit to the previous menu level, press <MENU>.
DMX Personality
This setting allows the user to choose a particular DMX personality.
1) Go to PERS.
2) Select the desired personality (TOUR, ARC.1, AR1.D, AR1.S, HSV, or BLOC).
3) See the DMX Values section for the highest starting address you can select for each
personality.
4) Make sure that the starting addresses on the various fixtures do not overlap due to the
new personality setting. See the DMX Values section.
DMX Control
In this mode, each unit will respond to a unique starting address from the DMX controller.
All units with the same starting address will respond in unison.
1) Select a DMX personality, as shown in DMX Personality.
2) Set the running mode:
a) Go to RUN.
b) Select DMX.
3) Set the starting address:
a) Go to ADDR.
b) Select the starting address (001~512).
To ensure full access to all channels in each DMX mode, the highest recommended DMX
addresses are as follows:
DMX Mode DMX Address DMX Mode DMX Address DMX Mode DMX Address
TOUR
503
AR1.D
509
HSV
510
ARC1
510
AR1.S
508
BLOC
507
Continues on the next page