Instruction manual

Setup
Page 60 ORB Series Operating Manual – Issue 2.0
Inputs
Press the [Inputs] key on the monitor. The various options are shown on the monitor.
Figure 49 - Desk Setup / Inputs
MIDI Timecode – The
frame rate of the MIDI
timecode being fed to
the desk, in fps.
Remote Switches - Each of
the six remote switches can be
configured to Disabled, Go to
Cue or Macro.
If the action field is set to Go
to Cue or Macro, then an
additional field is displayed
allowing you to enter the
stack/cue or macro number as
appropriate.
CAN – Not yet
implemented in
software
Set Date - Press the [Set Date] key on the monitor.
The Set Date Window is displayed. Enter the correct
Day, Month and Year in the fields provided and then
confirm by selecting the [OK] button.
Submasters Per Page –
The number of submasters
you require on each page.
Defaults to 10.
Submaster DMX
Address – The DMX –IN
address you will use to
control each submaster.
SMPTE Timecode –
The frame rate of the
SMPTE timecode being
fed to the desk, in fps.
Set Time - Press the [Set
Time] key on the monitor.
The Set Time Window is
displayed. Enter the correct
time in the field provided and
then confirm by selecting the
[OK] button.