User manual

4BAR™ User Manual 9 2/8/2012 10:53 AM
Automatic Mode
This fixture has several built-in automatic programs. To access them, please see the below
instructions:
1) Press the <MENU> button until one of the following is displayed:
AUTO, SND,
512.
2) Immediately, press the <DOWN> button until
AUTO is displayed (not necessary if
AUTO is already displayed).
3) Wait for 5 seconds.
4) Press <MENU> until the display reads “
S***”.
5) Then, use the <UP> and <DOWN> buttons to select the operating speed of the program.
Sound Mode
This fixture has several built-in automatic programs. To trigger these programs via sound, please see
the below instructions:
1) Press the <MENU> button until one of the following is displayed:
AUTO, SND,
512.
2) Immediately, press the <UP> button until
SND is displayed (not necessary if SND is
already displayed).
3) Wait for 5 seconds.
1. Then, use the <SOUND SENSITIVITY ADJUSTMENT KNOB> to adjustment the sensitivity
of the program to the sound received from the microphone.