User manual

EDIT A SCENE
Action 
1) Press the PROGRAM button for 3 seconds.
2) Locate the scene in the program BA
NK.
Use BANK UP/DOWN to navigate program
banks.
3) Select the SCENE in the progr
am BANK to
edit.
4) Adjust FA
DERS to change the look.
5) Press the MIDI/
ADD button then the
SCENE button again previously selected for
editing.
Notes

Deselect Blackout
if LED is lit.
! Remember the scene number on the controller that
you will edit, otherwise, you could overwrite the
contents of anot
her scene.
SCENE COPY
Action 
1) Press the PROGRAM button for 3 seconds.
2) Locate the scene in the program BA
NK.
Use BANK UP/DOWN to navigate program
banks.
3) Select the SCENE in the progr
am BANK to
copy.
4) Locate the destination scene in the program
BA
NK. Use BANK UP/DOWN to navigate
program banks.
5) Press the MIDI/
ADD button then the new
SCENE button to copy to.
Notes

DELETE SCENE
Action 
1) Locate the scene in the program BANK.
Use BANK UP/DOWN to navigate program
banks.
2) Press and hold the AU
TO/DEL button while
pressing the SCENE you want to delete.
Notes

The action of deleting a scene is actually a value reset
to 0 on all DMX
channels available to the scene
memory. The physical location of the scene memory
remains.
DELETE ALL SCENES
Action 
1) Press and hold the PROGRAM button and
the BANK (d) while you turn the controller
Off.
Notes

All scenes should be erased when the controller is
turned back on.
BANK COPY
Action 
1) Press the PROGRAM button for 3 seconds.
2) Locate the program BANK. Use BA
NK
UP/DOWN to navigate program banks.
3) Press and release the MIDI/
ADD button.
4) Locate the destination program BA
NK. Use
BANK UP/DOWN to navigate program
banks.
5) Press the M
USIC/BANK-COPY button to
compete copy.
Notes

The LCD display will blink to indicate a successful
copy.
DMX-40B User Manual 11 Revised: 2006-11-10 09:50:14