User manual

BANK DELETE
Action 
1) Press and hold the PROGRAM button for 3
seconds.
2) Locate the BA
NK to delete. Press the
AUTO/DEL and MUSIC/BANK-COPY at
the same time to delete the Bank.
Notes

The LED display will blink to indicate a successful
delete.
Chase Programming
A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory. See “Delete All Chases” for instructions.
CREATE A CHASE
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
Action 
1) Press and hold the PROGRAM button for 3
seconds.
2) Press the CH
ASE (1~6) button you wish to
program.
3) Change BA
NK if necessary to locate a
scene.
4) Select the SCENE to insert.
5) Tap the MI
DI/ADD button to store. All LED’s
will flash 3 times.
6) Repeat steps 3 ~ 5 to add additional steps
in the chase. Up
to 240 steps can be
recorded.
7) Press and hold the PROGRAM b
utton for 3
seconds to save the chase.
Notes

COPY BANK INTO CHASE
Action 
1) Press and hold the PROGRAM button for 3
seconds to enter programming mode.
2) Select the BA
NK to be copied using the
BANK UP/DOWN buttons.
3) Press M
USIC/BANK COPY and Midi/Add
buttons at the same time to copy.
4) Press and hold the PROGRAM b
utton for 3
seconds to exit programming mode.
Notes

DMX-40B User Manual 12 Revised: 2006-11-10 09:50:14