User manual

Playback (Chases)
MANUAL RUN CHASES
This function allows the user to manually step through each individual step in a chase.
Action 
1) Press and hold PROGRAM button for 3
seconds to enter programming mode.
2) Start a chase by pressing any one of the
CH
ASE buttons.
3) Press the T
APSYNC/DISPLAY button to
manually step through the chase.
4) Use the BA
NK buttons to scroll through the
chases.
5) Press and hold the PROGRAM b
utton for 3
seconds to exit programming mode.
Notes

AUTO RUN CHASES
Action 
1) Press any one of the CHASE buttons.
2) Press and release the A
uto / Del button.
The corresponding LED will blink.
3) Adjust the SPEED and FA
DE faders to your
liking.
4) You can override the speed and fade time
b
y tapping the TAPSYNC/DISPLAY button
(three) times. The chase will now run on the
interval time of the taps.
Notes

CAUTION! The
fade setting should never be slower
than the speed setting or the scene will never
complete execution.
MUSIC RUN CHASES
Action 
1) Press any one of the CHASE buttons.
2) Press and release the MUSIC/
BANK COPY
buttons. The corresponding LED will blink in
the display.
3) Your chase will now run to sound.
Notes

RUNNING SEQUENTIAL CHASES
Action 
1) Press either AUTO DEL or MUSIC BANK
COPY buttons to select the trigger mode.
2) Press the CHASE button for each chase
you
wish to playback.
3) Adjust the Chase speed by changing the
SPEED fader.
Notes

Chases must already be programmed.
The chases will run in the order they are pressed
DMX-40B User Manual 15 Revised: 2006-11-10 09:50:14