User manual

Setup
-6- COLORado™ 1 Quad IP User Manual Rev. 1
3. Setup
AC Power
The COLORado™ 1 Quad IP has an auto-ranging power supply that works
with an input
voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage.
To determine the
power requirements for the COLORado™ 1 Quad IP, refer to the specification label affixed
to the product or the specifications in this manual.
See the Technical Specifications.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download Sizing Circuit Breakers from the CHAUVET® website
:
www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0% to 100% switch.
AC Plug
The COLORado™ 1 Quad IP comes with a power input cord terminated with a IP 66
connector on one end and an Edison plug on the other end (U.S.
market). If the power
input cord that came with your product has no plug, or if you need
to change the Edison
plug, use the table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Power Linking
The COLORado™ 1 Quad IP supports power linking. You can power link up to 11 products
at 120 VAC.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.