User manual

Setup
-8- COLORado™ 1 Quad IP User Manual Rev. 1
Mounting
Before mounting this product, read and follow the Safety Notes in this manual.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
The COLORado™ 1 Quad IP consists of a double-bracketed yoke and the body of
the
product CHAUVET® recommends using the following general guidelines when mounting
this product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the product’s
weight. Refer to the Technical Specifications chart for the weight-bearing requirements
of this product.
• When hanging this product, always secure to a fastening device using a safety cable
(included).
Procedure
The COLORado™ 1 Quad IP comes with a double-bracketed yoke to which you can either
attach mounting clamps for hanging or simply use as a floor stand. You must supply
your
own mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. You will have to use at least one mounting point per product.
Product Mounting
Diagram
Floor Mounting
Overhead Mounting
Clamp
Safety Cable