TECHNICAL REFERENCE & MANUAL DMX MEGA STROBE DMX-750 CHAUVET 3000 North 29th Ct. Hollywood, FL 33020 USA Tel: 954-929-1115 Fax: 954-929-5560 www.CHAUVETlighting.
Table of Contents WARRANTY INFORMATION...............................................................................................3 INTRODUCTION ..................................................................................................................4 Product Overview ............................................................................................................................................................. 4 Technical Specifications ..............................................
Warranty Information We take great pride in the quality, value and performance of our products and believe that it should offer you trouble free operation throughout its lifetime providing you take care to follow the simple instructions in this manual.
I N T R O D U C T I O N Introduction Product Overview Thank you for purchasing the “DMX Mega Strobe” Model Number DMX-750. It is a very powerful and high output xenon strobe with enhanced features. It can operate in a sound to light mode and using any universal DMX control device. Enhanced operational manual controls using dip switches provide for both controls of intensity as well as a flash rate. An on-board thermal and circuit protection ensures safe operation for many years to come.
I N T R O D U C T I O N Technical Specifications Power Lamp Dimensions Shipping Control Features Warranty 16 Amps at 230V or 20 Amps at 115V Fan cooled Built-in thermal sensor protection Includes 20A magnetic circuit breaker 750 Watt Xenon Strobe CHAUVET Model No. CH750B 12.6 in x 8.15 in x 5.35 in 10.
I N T R O D U C T I O N Before you Begin Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
I N T R O D U C T I O N Warnings 1. This product is intended for indoor use only! 2. Keep out of the reach of children! 3. Make sure power cord is never crimped or damaged. 4. Never disconnect power cord by pulling or tugging on the cord. 5. Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture. 6.
O P E R A T I N G I N S T R U C T I O N S Operating Instructions General The DMX-750 is a 750 watt high output xenon strobe light that can be remotely operated using any universal DMX 512 controller. It is well suited for large rooms and can be daisy chained with additional DMX-750 strobes. You can vary the flash rate, intensity and trigger a preset lightning type effect commonly called “hyperflash” or “Blinder effect”. DMX Primer There are 512 channels in a DMX-512 connection.
O P E R A T I N G I N S T R U C T I O N S Example 1: Starting address (233) illustrated. SWITCH 1 OFF ON DMX VALUE 2 (1) 4 (4) (2) Example 2: Resolving starting address (233) using simple math. 3 5 6 7 (16) (8) 233 – (128) = 105, Turn ON Dip # 8 105 – (64) = 41, Turn ON Dip # 7 41 – (32) = 9, Turn ON Dip # 6 9 – (8) = 1, Turn ON Dip # 4 1 – (1) = 0, Turn ON Dip # 1 Turn ON Dip # 10 to activate DMX Mode You will most likely use the first available address.
O P E R A T I N G Level 9 10 11 12 13 14 15 16 I N S T R U C T I O N S Continuation from previous table.
A P P E N D I X Appendix Maintenance To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month. Dust build up reduces light output performance and can cause overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off fixture before conducting maintenance. Unplug fixture from power.
G E N E R A L T R O U B L E S H O O T I N G General Troubleshooting Applies to Symptom Solution(s) Lights Auto shut off Check fan thermal switch reset 9 Beam is very dim or not bright Clean optical system or replace lamp Check 220/110v switch for proper setting 9 Breaker/Fuse keeps blowing Check total load placed on device Foggers & Snow Controllers Dimmers & Chaser 9 9 9 Chase is too slow Check users manual for speed adjustment 9 Device has no power Check for power on Mains.