Operating instructions

Eclipse™ RGB User Manual 11 Rev. 7
4. OPERATING INSTRUCTIONS
Control
Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview to see the button locations on the control
panel.
Button Function
<MENU>
Press to find an operation mode or to back out of the current menu
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
Mode
Programming Steps
Description
Automatic
Programs
AuF
Automatic Mode, Fast
AuS
Automatic Mode, Slow
Sou
Sound Active Mode
rdn
Random Effect Mode
Sound
Sensitivity
S 0 S 0-S 9
Adjust sound sensitivity for Sound Active
Mode
Manual LED
Control
LEd
rgb
(r 0-r 9)
(g 0-g 9)
(b 0-b 9)
(Sr0-Sr9)
Manually adjust the LED color and strobe
rate
FdE
(Sp0-Sp9)
Manually adjust the LED color fade speed
DMX
Addressing
001 001-509
Set DMX starting address
Slave Mode
SLA
Sets Slave Mode
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting
Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that i
s too high, you
could restrict the access to some of the product’s channels.
The Eclipse™ RGB uses up to 12 DMX channels in its 12-channel DMX mode, which
defines the highest configurable address to 500.
If you are not familiar with the DMX protocol, download the DMX Primer f
rom the
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 001 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.