User manual

Geyser™ RGB Jr. User Manual Rev. 2 Page 13 of 16
5. TECHNICAL INFORMATION
Fogger
Maintenance
Do not allow the fogger to become clogged.
After every 40 hours of continuous
operation, use CHAUVET® Fog Cleaner Quart (FCQ)
through the system to prevent the
accumulation of particulate matter in the heating element.
The recommended cleaning procedure is as follows.
1. Unplug the product from power.
2. Empty all fog fluid from the machine.
3. Add cleaning solution to the tank.
4. Plug in the product and allow it to warm up.
5. Run the machine in a well-ventilated area until the tank is almost empty. Do not
allow the pump to run dry!
6. Refill with fog fluid. Run the machine briefly to clear any cleaning solution from the
pump and heater.
Fog Cleaner Quart (FCQ) was specifically developed by Chauvet to clean your
Geyser™ RGB Jr. Make sure you use FCQ regularly, no longer than 90 days
between cleanings, to increase the life of your fogger.
Storage
Before storing the fogger, run FCQ through the system as described in the cleaning
procedure above; however, only follow steps 1 through 5. Do not refill the tank with
fog fluid if storing the fogger.
Cleaning the system prior to storage will help prevent
any particles from condensing inside the pump or heater while not in use.
Test-run your Geyser™
RGB Jr. on a monthly basis to achieve the best
performance.